FTIR quantitative analysis technique for gases. Application in a biomass thermochemical processGRANADA, E; EGUIA, P; VILAN, J. A et al.Renewable energy. 2012, Vol 41, pp 416-421, issn 0960-1481, 6 p.Article

Simultaneous thermogravimetry―calorimetry study on the combustion of coal samples: Effect of heating rateKOK, Mustafa Versan.Energy conversion and management. 2012, Vol 53, Num 1, pp 40-44, issn 0196-8904, 5 p.Article

Effects of heating rate on slow pyrolysis behavior, kinetic parameters and products properties of moso bambooDENGYU CHEN; JIANBIN ZHOU; QISHENG ZHANG et al.Bioresource technology. 2014, Vol 169, pp 313-319, issn 0960-8524, 7 p.Article

Effect of temperature management on the hydrolytic degradation of PET in a calcium oxide filled tube reactorGRAUSE, Guido; HANDA, Tomohiko; KAMEDA, Tomohito et al.Chemical engineering journal (1996). 2011, Vol 166, Num 2, pp 523-528, issn 1385-8947, 6 p.Article

Thermogravimetric-mass spectrometric analysis on combustion of lignocellulosic biomassLOPEZ-GONZALEZ, D; FERNANDEZ-LOPEZ, M; VALVERDE, J. L et al.Bioresource technology. 2013, Vol 143, pp 562-574, issn 0960-8524, 13 p.Article

Gelation of whey protein and xanthan mixture: Effect of heating rate on rheological propertiesLI, J; OULD ELEYA, M. M; GUNASEKARAN, S et al.Food hydrocolloids. 2006, Vol 20, Num 5, pp 678-686, issn 0268-005X, 9 p.Article

Is sintering enhanced under non-isothermal conditions?ROURA, P; COSTA, J; FARJAS, J et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2002, Vol 337, Num 1-2, pp 248-253, issn 0921-5093, 6 p.Article

Heating rate dependence of glass transition and primary crystallization of Al₈₈Gd₆Er₂Ni₄ metallic glassTIAN, N; OHNUMA, M; HONO, K et al.Scripta materialia. 2005, Vol 53, Num 6, pp 681-685, issn 1359-6462, 5 p.Article

Fissure formation in coke. 2: Effect of heating rate, shrinkage and coke strengthJENKINS, D. R; MAHONEY, M. R.Fuel (Guildford). 2010, Vol 89, Num 7, pp 1663-1674, issn 0016-2361, 12 p.Article

Integral dependent on parameter E in classical non-isothermal kinetics with linear heating rate. IIURBANOVICI, E; SEGAL, E.Journal of thermal analysis. 1990, Vol 36, Num 4, pp 1599-1601, issn 0368-4466Article

Increase in the Alpha to Gamma Transformation Temperature of Pure Iron upon Very Rapid HeatingLANGNER, Jeremy; CAHOON, J. R.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2010, Vol 41, Num 5, pp 1276-1283, issn 1073-5623, 8 p.Article

A study of the numerical heating in electrostatic particle simulationsUEDA, H; OMURA, Y; MATSUMOTO, H et al.Computer physics communications. 1994, Vol 79, Num 2, pp 249-259, issn 0010-4655Article

Solar heating rates : the importance of spherical geometryLARY, D. J; BALLUCH, M.Journal of the atmospheric sciences. 1993, Vol 50, Num 24, pp 3983-3993, issn 0022-4928Article

Effects of heating rate on yield of levoglucosan in wood pyrolysisMIURA, M; TANAKA, S; ANDO, K et al.Kagaku kōgaku ronbunshū. 1995, Vol 21, Num 4, pp 843-846, issn 0386-216XArticle

Effect of heating rate on the pyrolysis yields of rapeseedHAYKIRI-ACMA, H; YAMAN, S; KUCUKBAYRAK, S et al.Renewable energy. 2006, Vol 31, Num 6, pp 803-810, issn 0960-1481, 8 p.Article

The determination of the activation energy of a relaxational process from thermally stimulated depolarisation currents (TSDC) data: an illustration with the β-relaxation of maltitolMOURA RAMOS, Joaquim J; CORREIA, Natalia T.Thermochimica acta. 2005, Vol 426, Num 1-2, pp 185-190, issn 0040-6031, 6 p.Article

New insights regarding the calcination as a critical parameter in the synthesis of sol―gel made titania powdersMOGYOROSI, K; KARACSONYI, E; CEGLED, Zs et al.Journal of sol-gel science and technology. 2013, Vol 65, Num 2, pp 277-282, issn 0928-0707, 6 p.Article

Rheological and structural properties of β-lactoglobulin and basil seed gum mixture: Effect of heating rateRAFE, Ali; RAZAVI, Seyed M. A; KHAN, Saad et al.Food research international. 2012, Vol 49, Num 1, pp 32-38, issn 0963-9969, 7 p.Article

Hydrothermal synthesis of a continuous zeolite beta layer by optimization of time, temperature and heating rate of the precursor mixtureMIES, M. J. M; REBROV, E. V; JANSEN, J. C et al.Microporous and mesoporous materials. 2007, Vol 106, Num 1-3, pp 95-106, issn 1387-1811, 12 p.Article

Effect of heating rate on starch granule morphology and sizePATEL, Bhavesh K; SEETHARAMAN, Koushik.Carbohydrate polymers. 2006, Vol 65, Num 3, pp 381-385, issn 0144-8617, 5 p.Article

Methodological considerations for using thermal analysis in the characterization of soil organic matterFERNANDEZ, José M; PLANTE, Alain F; LEIFELD, Jens et al.Journal of thermal analysis and calorimetry. 2011, Vol 104, Num 1, pp 389-398, issn 1388-6150, 10 p.Article

Effect of heating rate at different moisture contents on starch retrogradation and starch―water interactions during gelatinizationPATEL, Bhavesh K; SEETHARAMAN, Koushik.Stärke (Weinheim). 2010, Vol 62, Num 10, pp 538-546, issn 0038-9056, 9 p.Article

Pyrolysis characteristics and kinetics of sewage sludge for different sizes and heating ratesYUNBO ZHAI; WENFENG PENG; GUANGMING ZENG et al.Journal of thermal analysis and calorimetry. 2012, Vol 107, Num 3, pp 1015-1022, issn 1388-6150, 8 p.Article

Effect of heating rate on pore structure of porous FeAl materialGAO, H. Y; HE, Y. H; SHEN, P. Z et al.Powder metallurgy. 2008, Vol 51, Num 2, pp 171-175, issn 0032-5899, 5 p.Article

Transition from Diffusive to Displacive Austenite Reversion in Low-Alloy SteelNAKADA, Nobuo; TSUCHIYAMA, Toshihiro; TAKAKI, Setsuo et al.ISIJ international. 2013, Vol 53, Num 12, pp 2275-2277, issn 0915-1559, 3 p.Article